Installation Guide HR-01 PLUS
 
- DETAILS -

Detail drawing


 
Disclaimer:
Thermalright or its owners or partners is not responsible for damage or loss of any kind that may occur as a result of using or misusing this or any product we manufacture. Use common sense and review all product details prior to use. Ask a question


HR-01 PLUS CPU Cooler Installation
- STEP 1-
- STEP 2-
HR-01 Plus and its included accessories
The ones that are circled in red are for 775 sockets while the green ones are for AM2. To begin installation, please insert the hollow pillars through the mounting holes from the back of the plate and then use the appropriate O-rings to secure in place

- STEP 3 -
- STEP 4 -
Align and insert the pillars from the backplate through the mounting holes on the back side of the motherboard.
Install the appropriate bracket mount on the motherboard.

- STEP 5-
- STEP 6-
Apply a thin layer of thermal paste to the CPU and to the bottom of heatsink base.
Place CPU heatsink (HR-01 Plus) on top of CPU.

- STEP 7-
- STEP 8-
Secure the CPU heatsink (HR-01 Plus) in place with its mounting mechanism.
tick anti-vibration strips to heatsink fins (as shown in picture).

- STEP 9-
- STEP 10-
Insert each end of fan wire clips into holes on the fins and pull on wire clips to hook into fan mounting holes (as circled in red).
HR-01 Plus installation complete.
 
Copyright c 2003 Thermalright Inc. All rights reserved.