Intel Xeon

Origin

We have received many distraught emails from users across the globe complaining that their stock cooler would not allow them to overclock their servers. Another issues brought up was the noise they have to tolerate from the high RPM fans in order to keep the CPU at mediocre operation level. To solve these problems we upgraded the original HR-01 with 6 heat pipes, and with its proprietary thru holes you can pair it up with any low RPM 120mm fan and add the ability and flexibility to OVERCLOCK! At the same time enjoying the quietness the HR-01X brings while you work effortlessly and quietly.



Features
  • 120mm design for low-noise fan operation (120mm Fan optional)
  • Proprietary through holes on fins for efficient ventilation
  • Six heatpipes for well spread heat around aluminum fins
  • Soldered fins to copper base (nickel plated) to make effective contact
  • Light weight and easy installation
  • Adjustable positioning on CPU for best angle on installation

 

Technical Spec
  • Dimension : L110 x W60 x H159.5(mm) Heat sink only
  • Weight : 600g (Heatsink Only)



Motherboard Compatibilities

    Intel Xeon : 5000 Series,7000 Series. (Socket 603,Socket 604,Socket 771)

    Support Duo Core, Quad Core Processors

    For AMD Socket F processors (3U/4U) you need to buy 939 Bolt thru kit for your HR-01X


Performance Test


System Used
Processor: Intel Xeon E5130 (Quad Core) 1.2V
Processor Cooling: Stock Xeon Cooler & HR-01 X ( 120mm ADDA 1600RPM)
Motherboard: Supermicro X7DAL
RAM: Transcend DDR2 667 512MB*2 FB-DIMM
Hard Drive: Seagate 80GB
Graphics Card: 8800GTX

HR-01 X FAQ
The mounting mechanism of HR-01X allows it to rotate to face any direction. Does this apply to any motherboard?

The mounting mechanism for HR-01X will allow it to do so for motherboards that have asymmetric orientation of the CPU sockets and having plenty of space in between as in the case of Intel SE7525RP2.

Awards & Accolades Find out why we are the best.
 

Copyright c 2003 Thermalright Inc. All rights reserved.