Socket 1366

Features
  • Uses high quality aluminum fins for best balance of heat absorption and conduction.
  • Utilizes six high quality 6mm heatpipes, strategically positioned to pick up the heat from the CPU.
  • Proprietary bent winglet design to minimize airflow resistance.
  • Heat pipes soldered to base (nickel plated) and fins for optimum heat transfer.
  • Stack of 52 pieces of aluminum fins, the most over any other heatsinks in the market. Can be covered entirely by a 120mm fan to absorb all in-coming air flow.
  • Vast compatibility list for multiple multi-core CPUs and platforms.
  • Includes one Ultra low noise ˇ§Fluid Dynamic Bearingˇ¨ fan (1600RPM)
  • Includes the NEW 120x25mm Fan holder.

Technical Spec

Heatsink
Dimension: L132 x W63 x H160.5 mm
Weight: 790g (Heatsink only)
Heat pipes: Six heat pipes

Heatsink detail drawing

Fan
Dimension: L120 x W120 x H25mm
Bearing type: FDB (Fluid Dynamic Bearing)
Rated Speed: 1600RPM
Noise Level: 28.0 dBA
Air Flow: 63.7CFM

Fan holder detail drawing

Compatibility

Supports Intel Core i7 965XE/940/920 Processors

Components
Ultra-120 eXtreme
1366 Bracket x 1
1366 Backplate x 1
FDB fan 1600RPM x 1
120mm Fan holder x 1
  ˇ@  
1366 Spring-loaded screws x 4
Chill Factor Thermal paste x 1

Accessories List

Ultra-120 Series Fan holder



FAQ

1. My 1366 motherboard comes with its own backplate. Do I need to remove it when installing the Ultra120 eXtreme-1366?

2.The Ultra-120 eXtreme 1366 RT includes the new fan holder. If I purchased another fan holder, would I still be able to install two fans for the push-pull method?



FAQ 1
   
Question :  My 1366 motherboard comes with its own backplate. Do I need to remove it when installing the Ultra120 eXtreme-1366?
   
Answer :  There is no need to remove the stock backplate. You can install the included LGA1366 backplate over the stock backplate.

FAQ 2
   
Question :  The Ultra-120 eXtreme 1366 RT includes the new fan holder. If I purchased another fan holder, would I still be able to install two fans for the push-pull method?
   
Answer :  Yes, you can. You can install one fan holder and one fan on each side of heatsink as depicted in the below illustration.