Disclaimer:
Thermalright or its owners or partners
is not responsible for damage or loss
of any kind that?? may occur as a
result of using or misusing this or
any product we manufacture. Use common
sense and review all product details
prior to use. Ask a question
775 Installation
- STEP 1-
- STEP 2-
Ultra120
eXtreme and its included parts.
Align and
insert the pillars from the backplate through the mounting holes on the back
side of the motherboard.
- STEP 3 -
- STEP 4 -
Apply a thin
layer of thermal paste to the top of CPU and bottom of heatsink
base.
Slide the
mounting bracket through between the heatpipes in its retracted
form.
STEP 5
STEP 6
Once through,
revert the mounting bracket back to its full extended form and align the four
corners to the four mounting holes.
Select the
appropriate spring loaded screws from your accessory
pack.
STEP 7
In a criss
cross (diagonal) pattern, bolt down on the 775 spring loaded s??crews.
Installation complete.
AM2 Installation
- STEP 1-
- STEP 2-
To install on
an AM2 platform, first remove stock RM.
Apply a thin
layer of thermal paste to the top of CPU and bottom of heatsink
base.
- STEP 3-
- STEP 4-
As shown in
the above illustration, have one sideof AM2 mounting bracket touching the
heatpipe using it as a pivotal point and rotate it in between the
heatpipes.
Installation
of mounting bracket complete.
- STEP 5-
- STEP 6-
Select the
appropriate spring loaded screws from your accessory pack.
In a criss
cross (diagonal) pattern, bolt down on the AM2 spring loaded
screws.
STEP 7
Installation
of AM2 Ultra-120 eXtreme
complete.
Fan Installation
- STEP 1-
- STEP 2-
Apply the
anti-vibration strips to where it depicts in the above
illustration.
Insert each
end of fan wire clips into their designated fan holes on the
heatsink.
STEP 3
Place a fan
to the heatsink and pull on the wire clips to hook into the fan mounting holes.
Installation of fan complete.
Copyright c 2003 Thermalright
Inc. All rights reserved.
