Disclaimer:
Thermalright or its owners or partners
is not responsible for damage or loss
of any kind that may occur as a result
of using or misusing this or any product
we manufacture. Use common sense and
review all product details prior to
use. Ask a question
775 Installation
- STEP 1 -
- STEP 2 -
Insert the
755 hollow pillars through the backplate and then apply the 775 O-Ring from the
other side.
Do the four
corners repeating Step 1.
- STEP 3 -
- STEP 4 -
Stick the
pillars through the mounting holes on the back side of the
motherboard.
Install the
appropriate bracket mount on the
motherboard.
- STEP 5 -
- STEP 6 -
If you want
to rotate the heatsink 90 degrees, rotate the positioning of the bracket mounts
to be installed.
Apply a thin
layer of thermal paste to the CPU and to the bottom of heatsink
base.
- STEP 7 -
- STEP 8 -
Place the
mounting plate on top of the heatsink base lining up with the holes from the
bracket mounts.
Tighten
spring loaded screws on the mounting plate to complete
installation
AM2 Installation
- STEP 1 -
- STEP 2 -
Remove stock
AM2 RM.
Motherboard
with the RM removed.
- STEP 3-
- STEP 4-
Insert the
AM2 hollow pillars through the backplate and then apply the AM2 from the other
side.
To complete
the installation of the backplate, repeat Step 3 for the remaining three
corners.
- STEP 5-
- STEP 6-
Align and
insert the pillars from the backplate through the mounting holes on the back
side of the motherboard.
Install the
appropriate bracket mount on the motherboard. (with AM2, heatsink cannot be
rotated)
- STEP 7-
- STEP 8-
Apply a thin
layer of thermal paste to the CPU and to the bottom of heatsink
base.
Place the
mounting plate on top of the heatsink base lining up with the holes from the
bracket mounts.
- STEP 9 -
Tighten
spring loaded screws on the mounting plate to complete
installation
90mm Fan Installation
- STEP 1 -
- STEP 2 -
Stick
anti-vibration strips to heatsink fins (as shown in picture).
Insert each
end of fan wire clips into holes on the fins and pull on wire clips to hook into
fan mounting holes (as circled in
red).
- STEP 3 -
90mm
Fan Clip installation complete.
120mm Fan Installation
- STEP 1 -
- STEP 2 -
Insert each
end of fan wire clips into holes on the fins and pull on wire clips to hook into
fan mounting holes (as circled in red).
