Disclaimer:
Thermalright or its owners or partners
is not responsible for damage or loss
of any kind that may occur as a result
of using or misusing this or any product
we manufacture. Use common sense and
review all product details prior to
use. Ask a question
Single-sided memory module Installation
Guide
- STEP 1-
- STEP 2-
Clean
the surface of memory module in
preparation for application of adhesive
tapes.
Extract
from the accessory pack two thermal
adhesive pads; one thin and one
thick.
- STEP 3 -
- STEP 4 -
Stick
the thinner pad to the side that
has the memory chips and the thicker
pad to the other side.
Align
the memory module to the opening
of the heatsink's clip and carefully
slide the module into the clip.
- STEP 5 -
- STEP 6 -
Then
push the memory module all the way
in.
Whichever
Dual Channel combination you choose;
1&3 or 2&4, insert the memory
module with the heatsink attached
into the memory slot closest to
the CPU heatsink first
Memory module Fan Installation
- STEP 1-
- STEP 2-
Select
the screws in accordance to the
size of your chosen fan.
Install
the four pieces of fan adapter on
the HR-07 as shown in the picture.
- STEP 3 -
STEP 4-
Place
the fan on top of HR-07 and insert
the selected screws through the
fan mounting holes to align the
screws to the holes on the arm plate.
Tighten the screws to secure in
place.
Installation
Complete.
Copyright c 2003 Thermalright
Inc. All rights reserved.
