Installation Guide HR-03 GTX
Installation
 
- DETAILS -

Detail drawing
HR-03 GTX TYPE 1 Installation
HR-03 GTX TYPE 2 Installation
Fan installation

¡@
¡@Disclaimer:
Thermalright or its owners or partners is not responsible for damage or loss of any kind that may occur as a result of using or misusing this or any product we manufacture. Use common sense and review all product details prior to use. Ask a question


Installation Type I
- STEP 1-
- STEP 2-
HR-03 GT and its included accessories.
Remove 8800GT stock cooler.

- STEP 3 -
- STEP 4 -
Remove stock cooler’s screws.
Clean thermal paste thoroughly off the RAM.

- STEP 5 -
- STEP 6 -
Clean thermal paste thoroughly off the GPU & RAM.
(how to clean thermal paste)
Unpeel the backing off the RAM heatsinks and stick them to each RAM. For RAMs above the GPU, use the flat version of the RAM heatsinks.

- STEP 7-
- STEP 8-
Apply the include other RAM sinks.
Apply the include PWN-Heat sinks.

- STEP 9-
- STEP 10-
Stick the transparent adhesive to the backplate as shown in the picture.
Stick the transparent adhesive to the backplate as shown in the picture.

- STEP 11-
- STEP 12-
Affix the backplate to the back of the video card.
Apply a thin layer of thermal paste to top of the GPU& heatsink’s base.

- STEP 13-
- STEP 14-
Attach the bracket mount to the heatsink
Then insert the black washers through the screws from the other side.

- STEP 15-
- STEP 16-
Use the screw caps to secure heatsink in place.
Then screw caps other side

- STEP 17-
HR-03 GT TYPE 1 Installation complete.


Installation Type 2
- STEP 1-
- STEP 2-
HR-03 GT and its included accessories
Remove 8800GT stock cooler

- STEP 3 -
- STEP 4 -
Remove stock cooler’s screws.
Clean thermal paste thoroughly off the RAM.

- STEP 5-
- STEP 6 -
Clean thermal paste thoroughly off the GPU & RAM.
(how to clean thermal paste)
Unpeel the backing off the RAM heatsinks and stick them to each RAM. For RAMs above the GPU, use the flat version of the RAM heatsinks.

- STEP 7-
- STEP 8-
Apply the include other RAM sinks.
Apply the PWM IC heatsinks

- STEP 9-
- STEP 10 -
Stick the transparent adhesive to the backplate as shown in the picture.
Apply a thin layer of thermal paste to top of the GPU& heatsink’s base

- STEP 11-
- STEP 12 -
Insert the included screws through the four holes on the bracket mount as shown in the picture.
Insert the included screws through the four holes on the bracket mount as shown in the picture.

- STEP 13-
- STEP 14 -
insert the screws through the four mounting holes..
Then insert the black washers through the screws.

- STEP 15-
- STEP 16 -
From the topside of the card, insert the cross-shaped backplate through the four screws.
Secure the heatsink using the screw caps

- STEP 17-
- STEP 18 -
Secure the heatsink using the screw caps.
HR-03 GT TYPE 2 Installation complete.


3870 & 3850 Installation
- STEP 1-
- STEP 2-
The difference in installation between 3870 and 3850 is in the type of thermal tape on the RAM sinks.
Remove stock cooler’s screws.
Remove stock cooler& Heat sink. Clean thermal paste thoroughly off the GPU & RAM.
(IMPORTANT!: How to clean thermal paste)

- STEP 3-
- STEP 4-
Apply other included A, B, C RAM sinks.

Apply the PWM IC heatsinks. For 3870, you can choose to keep the stock PWN-IC Heat sinks.


Fan Installation
- STEP 1-
- STEP 2-
Fan wire holes on the heatsink..
Insert the fan wire ends into fan wire holes on the heatsink

- STEP 3-
Place the 92mm fan on top of heatsink. Pull fan wire to hook into fan mounting holes.

Copyright c 2003 Thermalright Inc. All rights reserved.