Disclaimer:
Thermalright or its owners or partners
is not responsible for damage or
loss of any kind that may occur
as a result of using or misusing
this or any product we manufacture.
Use common sense and review all
product details prior to use. Ask
a question
Installation Type 1
- STEP 1-
- STEP 2-
HR-03/R600
and its included accessories
Remove
HD-2900XT stock cooler
- STEP 3 -
- STEP 4 -
Remove
stock cooler・s screws.
Clean
thermal paste thoroughly off the
RAM.
- STEP 5-
- STEP 6-
Remove
PCI-E Panel・s screws.
Clean
thermal paste thoroughly off the
GPU & RAM.
- STEP 7-
- STEP 8-
Unpeel
the backing off the RAM heatsinks
and stick them to each RAM. For
RAMs above the GPU, use the flat
version of the RAM heatsinks.
Apply
the include backside RAM sinks.
- STEP 9 -
- STEP 10 -
Clean
thermal paste thoroughly off the
PWN-IC.
Apply
the PWM IC heatsinks
- STEP 11 -
- STEP 12 -
Stick
the transparent adhesive to the
backplate as shown in the picture.
Insert
the included screws through the
four holes on the cross-shaped
backplate.
- STEP 13 -
- STEP 14 -
Then
insert the black washers through
the screws from the other side.
Affix
the backplate to the back of the
video card.
- STEP 15 -
- STEP 16 -
Apply
a thin layer of thermal paste
to top of the GPU& heatsink・s
base.
Attach
the bracket mount to the heatsink.
- STEP 17 -
- STEP 18 -
Use
the screw caps to secure heatsink
in place. Installation complete.
HR-03/R600
TYPE1 Installation complete.
Installation Type 2
- STEP 1-
- STEP 2-
HR-03/R600
and its included accessories
Remove
HD-2900XT stock cooler
- STEP 3 -
- STEP 4 -
Remove
stock cooler・s screws.
Clean
thermal paste thoroughly off the
RAM.
- STEP 5-
- STEP 6-
Remove
PCI-E Panel・s screws.
Clean
thermal paste thoroughly off the
GPU & RAM.
- STEP 7-
- STEP 8-
Unpeel
the backing off the RAM heatsinks
and stick them to each RAM. For
RAMs above the GPU, use the flat
version of the RAM heatsinks.
Apply
the include backside RAM sinks.
- STEP 9 -
- STEP 10 -
Clean
thermal paste thoroughly off the
PWN-IC.
Apply
the PWM IC heatsinks
-
STEP 11-
- STEP 12-
Stick
the transparent adhesive to the
backplate as shown in the picture.
Insert
the included screws through the
four holes on the bracket mount
as shown in the picture.
- STEP 13-
- STEP 14-
Then
insert the black washers through
the screws.
Apply
a thin layer of thermal paste
to top of the GPU& heatsink・s
base
- STEP 15-
- STEP 16-
Place
the bracket mount on top of heatsink
base and insert the screws through
the four mounting holes.
From
the topside of the card, insert
the cross-shaped backplate through
the four screws.
- STEP 17-
- STEP 18-
Secure
the heatsink using the screw caps.
Installation complete.
HR-03/R600
TYPE2 Installation complete.
Fan Installation
- STEP 1-
- STEP 2-
PInsert
the fan wire ends into fan wire
holes on the heatsink.
