Disclaimer:
Thermalright or its owners or partners
is not responsible for damage or
loss of any kind that may occur
as a result of using or misusing
this or any product we manufacture.
Use common sense and review all
product details prior to use. Ask
a question
installation
- STEP 1-
- STEP 2-
V2
VGA cooler and its included accessory
parts.
Remove
stock cooler from your VGA card.
- STEP 3 -
- STEP 4 -
Using
rubbing alcohol to clean off completely
of any residue left on the memory
chips.
Iply
the "tall" RAM heatsinks
to the memory chips.
- STEP 5-
- STEP 6-
Apply
the"short" RAM heatsinks
to the memory chips located above
the GPU.
Insert
screws with the shorter end
of shred into the holes on the
heatsink from the bottom side.
- STEP 7-
- STEP 8-
thermal
compound to the bottom of heatsink
base.
nsert
screws along with the heatsink
through the mounting holes and
then apply the white washers
on the other end.
- STEP 5 -
Secure
the heatsink in place by screwing
up the screw caps.
Fan
Installation
- STEP 1-
- STEP 2-
Select
the appropriate fan wire clips
for your fan.
Insert
one end of fan wire clip into
the hole on the heatsink (circled
in red). Apply the same procedure
for the other hole diagonally
across.
- STEP 3-
- STEP 4-
In
a diagonal pattern to secure the
fan in place.
Apply
the same method if for 25mm (thick)
fan.
Copyright c 2003 Thermalright
Inc. All rights reserved.
