80mm of fin area, specially designed for the VRM of 5870/5850 VGA cards,effectively lowers the high temperature and prolongs the VGA life, providesgreater range of over-clocking performance .

Patented High-riser punched fins, give better airflow between the fin area, superb cooling performance for both active (with fan) and passive cooling ( without fan) .

Double 6mm heatpipes, soldered tightly with fin, to ensure fastest Thermal conductivity .

Easy Installation, “Hand Turnable” screws provided, installation can be done without any extra tools .

No extra fans needed, can use airflow from the Tower cpu cooler when needed .

One 80 x 15mm or 80 x 25mm fan can be installed ( need to be bought separately) .


Product Description

Length 118mm x Width 117mm x Height 122mm
Weight: 140 grams
Heat-pipe : 6mm heat pipe x 2 units
Fan: one 80 x 15mm or 80 x 25mm

Thermalright Spitfire & ATI 5870/5850 VGA cards only. (only compatible with Stock PCB design /Reference design)

Please see below pictures : Picture 1. is of reference card, and Picture 2 is non-reference card in which our VRM will not be compatible with.

Note: VRM R5 will not be compatible with T-rad2 , T-rad2 GTX, or HR-03 series.

REMARK*The models listed are based on ATI’s reference mechanical layout. Some manufacturers stray away from the the standard reference board design and develop their own layout. For those, Thermalright holds no responsibility in case of incompatibility after purchase of Thermalright product(s).

HWMania Overclockers Club Overclockers.ua Hardware academy NextHardware PCGH PC-MAX
Spitfire & VRM R5 Spitfire & VRM R5 Spitfire & VRM R5 Spitfire & VRM R5 Spitfire & VRM R5 Spitfire & VRM R5 VRM R5


Legionhardware AnandTech HardPoint Pureoverclock 59hardware Occlub RU Amdclub
Spitfire & VRM R5 Spitfire & VRM R5 VRM R5 Spitfire & VRM R5 Spitfire & VRM R5 Spitfire & VRM R5 Spitfire & VRM R5